Default gateway
10602049836327222433493328
SCOR LabsAccess Link to Cisco Remote Labs
The Code used in the Labs is as follows :-
ASA Version 9.10(1)30 ASDM Version 7.(10).1 WSA Version V11.8 ![]()
![]()
![]()
|
LAB Access Video |
|
|
|
Lab 4 Required a reset (Remember default ACP rule change)
Note about NAT rule order Note about Task 2 step 2 leave as default To get a response in the web browser modify the social rule to give a http response (in test still do not see it). It was blocked and events confirmed this just no message Telnet on port 23 for test on the FTD cli the snort rules will be refered to by a different name just find using cd ls found 131.253.18.12 could not find http://whraf.org just use another |
|
Lab 5 Required a Reset (Remember default ACP rule change)
Network discovery did not work for me :( added host to default discovery rule and left alone IT WORKED :) NO OS found in host profile. out_to_dmz rule AS PER RLAB NOTE |
|
Lab 6
Pop up message note Save file tip note for malicious pdf look in firefox downloads for failed download of pdf etc |
|
Lab 7
Messages about AsyncOS when your first go into ESA server manager-->Tools-->DNS browser accept risk (not add exception) @ = " symbol issue Thunderbird ICON on left hand side Enable the Virus and malware steps can be skipped Patience waiting for email required :) I would clear every time in message tracker |
|
Lab 8
Enable the Virus and malware steps can be skipped Some of the message numbers do not match though the text does :) |
|
Lab 9
Some difference in the options in this version stick with the lab guide. Slow to get to anti malware options. step 15 There are issues with the anti malware setting looks like it is all set and cannot commit changes and error pops up on commit. Step 18 Feature key settings not the same lots missing step 12 Cisco page takes an age to load step2 show 82 urls monitored not 84 no error message on facebook as per lab guide however it was stopped. Noticeable delay going through WSA Saving the certificate on the first attempt worked next attempts gave a failed network error |
|
Lab 10
Intertestingly all AMP files are set in Lab 10 though they could not be set in Lab 9 Paience when joining AD Not sure about the note on 41 in rlab guide it seemed okay to me |
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab 14
additional message when configuring interfaces on FTD on the transform-set for aes-gcm should read esp-gcm If any issues bounce tunnel interface 0. |
|
Lab 15 Patience again especially for object manager FTD Multiple key presses occurr in cli ASDM white text on blue background not easy to see. screen shot shoes group policy 2 when it is 1 Warning message came up when I applied from ASDM Not sure RLAB note on step 14 is correct should read step 24 Step 28 ping to 192.168.1.2 did not work so tried 192.168.1.3 and it worked. so HQ to Branch worked I Also pinged from Branch to HQ. and it worked. |
|
Lab 16 Had to add self signed cert again :( Task 2 step 32 shows against ipsec red cross in fact it is green as it is in the default which has not been altered. Anconnect icon on this linux pc is in the top right hand corner |
|
Lab is an interactive video
Does not quite match the lab guide in places |
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|
Lab is an interactive video
|
|